Concentric Bearings A is a two-colour print using aquatint, photogravure and drypoint techniques on Rives BFK paper that brings together prints from two separate plates on a single sheet of paper. One print is an image of a starry night sky while the other replicates a drawing by the artist based on a photograph of Rotary Glass Plates (Precision Optics) (1920) (Yale Center for British Art, New Haven, Connecticut) by the artist Marcel Duchamp (1887–1968). It is the first of four prints, lettered A–D, that make up the Concentric Bearings series. It was printed and published by Gemini G.E.L. (Graphic Editions Limited) in Los Angeles in an edition of thirty-four plus six artist’s proofs, in collaboration with master printmakers Kenneth Farley and Doris Simmelink. The copy held by ARTIST ROOMS is artist’s proof number 5/6, inscribed at the bottom left corner of the print, and signed by the artist at the bottom right in pencil.

The narrow rectangular print of a starry sky is based on a found photograph rather than direct observation of the night sky, and has been printed using aquatint. The curator Susan Lambert has described the basic premise of aquatint as ‘a method of etching in tone’ (Lambert 2001, p.60). Etching is an intaglio technique: an incised design where the print surface is sunk beneath the areas that are to remain blank. This print has a lively, textured surface. Looking closely, evidence of the drypoint’s linear engraving is visible. The drypoint needle, often used to retouch and refine an aquatint, here enhances the detailing of the variously shaped stars, whose pinpricks of light are in fact the un-inked white surface of the paper, which contrasts dramatically with the pitch black ink of the deep space that surrounds them.

The slightly larger accompanying image depicting Rotary Glass Plates (Precision Optics)makes use of photogravure to transfer the soft, greyscale quality of Celmins’s pencil drawing of the photograph into printed form. The artist commented on this process in a 2001 interview with the curator Samantha Rippner, saying: ‘I made a drawing on vellum specifically for the print. I drew the rotary device from a photograph, of course, with all its beautiful lines and shapes, and then transferred the drawing to the plate using photogravure.’ (Quoted in Rippner 2002, p.35.) Explaining this technique of photogravure, Susan Lambert states that it is:

a process by which a line or tonal image can be transferred photographically to a metal plate in such a way that it can be etched in one operation without stopping out by hand … it is dependent on the characteristics of light-sensitised gelatine. The image is printed on to the gelatine, and then the gelatine is attached to the plate.
(Lambert 2001, pp.67–8.)

This multi-stage image development, in which a photograph is translated into a drawing which is then transferred photo-mechanically onto a reprographic printmaking plate, demonstrates the layered complexity of Celmins’s working practices and highlights the ambiguous relationship between hand-drawn and mechanical mark-making in her prints. Duchamp’s motorised work is equally concerned with layering, in the form of a spatial illusion that rotates five separate panes of glass to appear in motion as a series of complete concentric circles. Celmins has also included drawn reproductions of notable works of art in other prints, such asConstellation – Uccello (1983), another dual-image print in the ARTIST ROOMS collection that features the artist’s traced version of the Italian Renaissance artist Paolo Uccello’s Perspective Study of a Chalice (about 1430–40, Uffizzi, Florence).

Concentric Bearings A is the first print in a series of four works that collectively presents four separate plates (two different night sky prints, the Duchamp photogravure, and a grainy image of a falling plane) in different configurations so that no one print contains all images from the series. Prints A and B contain two images each, while Cand D have three images. A sequence of repetitions and juxtapositions occur over the series as a whole. Discussing the genesis of theConcentric Bearings series, Celmins has said:

A sort of theme was developing around describing space … about spirals, concentric circles, the plane spiralling down, the rotary device spinning, the stars turning: a similarity of events. And of course I always liked Duchamp’s piece and also the reproduction through which I found it. I though it was kind of humorous that Duchamp wasn’t going to call his object art, so I put it in something that maybe you would call myart. It’s those little nuances that hold the work together.
(Quoted in Rippner 2002, pp.34–5.)

In Concentric Bearings A the two images are small relative to their paper support, which is a large, portrait-oriented sheet. There is more blank paper beneath the plates than above, and the prints appear to float against this large expanse of bare white paper, positioned close together and aligned along their bottom edges. As part of a series of prints that investigates spatial relations, this proportionality is purposeful. The artist has commented on this aspect of her printmaking practice, explaining:

The paper became an extension of the print. How the print sat on the paper and the peculiar proportion and placement all became the work … My feeling is that every decision about the size of the borders has a corresponding effect on how one perceives the image.
(Quoted in ibid., p.15.)

Further reading
Susan Lambert, Prints: Art and Techniques, London 2001.
Samantha Rippner, The Prints of Vija Celmins, exhibition catalogue, Metropolitan Museum of Art, New York 2002, reproduced p.26.

Stephanie Straine
June 2010